Failed Glock Modifications
- WLJ
- KAC Member
- Posts: 30880
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Failed Glock Modifications
Wow
Now did the owner try his hand at doing this himself and after F'ing up decided to blame someone else or did he really get it back from the company in this condition?
Failed Glock Modifications By Experts
http://www.thefirearmblog.com/blog/2016 ... y-experts/
Now did the owner try his hand at doing this himself and after F'ing up decided to blame someone else or did he really get it back from the company in this condition?
Failed Glock Modifications By Experts
http://www.thefirearmblog.com/blog/2016 ... y-experts/
Last edited by WLJ on Wed Jun 29, 2016 9:50 am, edited 1 time in total.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
- DDgunslinger
- Posts: 3430
- Joined: Sat Mar 03, 2012 8:10 pm
- Location: Louisville
- Has liked: 0
- Been liked: 0
- Contact:
Re: Failed Glock Modifications
The work seems shady and the comments are from key board warriors.... Love or Hate Glocks, either way... there is a whole lot of "Nope" in this link.
- ssracer
- KAC Member
- Posts: 13804
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 61 times
- Contact:
Re: Failed Glock Modifications
With what Zev charges I would highly doubt they did that. I wouldn't think a company doing high end glock mods would send out something that damn shitty. But who knows.
-
- Global Mod
- Posts: 12053
- Joined: Sat Mar 03, 2012 8:50 pm
- Location: Louisville
- Has liked: 20 times
- Been liked: 22 times
Re: Failed Glock Modifications
Pretty wild and unbelievable but I don't know the guy so maybe legit and they knew nobody would believe.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
-
- Global Mod
- Posts: 12053
- Joined: Sat Mar 03, 2012 8:50 pm
- Location: Louisville
- Has liked: 20 times
- Been liked: 22 times
Re: Failed Glock Modifications
I mean post your receipt or emails.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
- ssracer
- KAC Member
- Posts: 13804
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 61 times
- Contact:
Re: Failed Glock Modifications
Updated:
Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
- Wyldman
- KAC Member
- Posts: 6984
- Joined: Sat Mar 03, 2012 8:01 pm
- Location: Spring, TX
- Has liked: 0
- Been liked: 0
Re: Failed Glock Modifications
And that person would be on the receiving end of a bill for a brand new slide and a serious ass-whipping if they so much as coughed when they got said bill.ssracer wrote:Updated:
Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
I don't mind if someone fucks up, as long as they own it and do everything possible to make it right.
Crush, kill, mangle, maim, destroy.
IN GOD WE TRUST
"That boy's paradigm don't always add up to four nickels...."
"That boy's paradigm don't always add up to four nickels...."
- ssracer
- KAC Member
- Posts: 13804
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 61 times
- Contact:
Re: Failed Glock Modifications
Especially since a Zev slide will run you more than a whole new GlockWyldman wrote:And that person would be on the receiving end of a bill for a brand new slide and a serious ass-whipping if they so much as coughed when they got said bill.ssracer wrote:Updated:
Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
I don't mind if someone fucks up, as long as they own it and do everything possible to make it right.
Crush, kill, mangle, maim, destroy.
- WLJ
- KAC Member
- Posts: 30880
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Failed Glock Modifications
that first slide with the JB Weld was NOT done by ZEV. The slide was a ZEV product, but the work was done by a local firearms shop with a long history of fucking things up. They’ve recently been raided by the ATF. Seems they’re as good with paper work as they are with the guns they work on, and continue to work on even after the ATF raid. Their name is Metal EFX, feel free to give them a google.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
- son of liberty
- KAC Member
- Posts: 1759
- Joined: Sat Mar 03, 2012 9:22 pm
- Location: Carrollton
- Has liked: 0
- Been liked: 0
- ssracer
- KAC Member
- Posts: 13804
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 61 times
- Contact:
- Toecutter1978
- KAC Member
- Posts: 10474
- Joined: Sun Oct 27, 2013 8:08 pm
- Location: Brooks
- Has liked: 0
- Been liked: 14 times
Re: Failed Glock Modifications
Some of the Comments are gold! Niceguy was laughing at me when I looking at the pics, backyard smithing.