The Kalashnikov Optics Platform from Sabrewerks

http://www.meridianordnance.com/

Meridian Ordnance LLC is a custom firearms shop offering personalized attention to detail and support from beginning to end for your project. Each piece gets individual attention, and is hand fitted unlike other high volume manufacturers.
User avatar
mike@meridian
Posts: 72
Joined: Mon Dec 09, 2013 10:24 am
Location: KY
Has liked: 0
Been liked: 0
Contact:

The Kalashnikov Optics Platform from Sabrewerks

Post by mike@meridian » Mon Jun 09, 2014 2:51 pm

If you are not familiar with the Sabrewerks KOP system for the AK47/AKM/PSL and similar variants, check it out! Meridian Ordnance is a certified installer for KOP systems. A little on the KOP system from our website:

"The KOP is a fully integrated interchangeable optics mounting system for the Kalashnikov family of firearms. The KOP System consists of a rear sight block platform and interchangeable optic mounts. The Platform is mounted to your rifle in place of the original rear sight block (RSB). This Platform allows the use of any of numerous interchangeable Optic Mounts available from Sabrewerks. Each Optic Mount is specifically designed to mount an off-the-shelf optic such as the Aimpoint T1/H1, Trijicon RMR and many more. Optic Mounts are also available for mounting scopes and many have Picatinny rails for mounting your choice of rail mounted gear.

Your interchangeable Optic Mounts allow you, the shooter; to rapidly swap optics. Start shooting with your Aimpoint installed for fast acquisition shooting. Swap out a magnified optic for long distance, and change to your starlight scope when the sun goes down, all with the same base. Optic Mounts can be swapped in less than a minute, with no tools. In addition, the KOP system allows for normal disassembly of the host rifle and transmits very little heat to the mount or the optic during prolonged strings of fire or heavy use.

Meridian Ordnance LLC offers KOP installation on any host rifle, carbine, or short barrel rifle that will accept a factory Sabrewerks rear sight base platform. Generally, installation will require removal of the front sight block, gas block and rear sight block."

Contact us for a quote!

More here:
http://www.sabrewerks.com/
http://meridianordnance.com/services.htm#kop

Image
http://meridianordnance.com/images/proj ... G_1601.JPG

Image
http://meridianordnance.com/images/proj ... G_1600.JPG
Meridian Ordnance LLC
07/02 SOT Gunsmithing, Refinishing & Sales
http://www.meridianordnance.com
Find us on Facebook at:
https://www.facebook.com/meridianordnance

User avatar
Toddstang
Global Mod
Global Mod
Posts: 13817
Joined: Sat Mar 03, 2012 7:52 pm
Location: In A Van, Down by the river.
Has liked: 145 times
Been liked: 96 times

Re: The Kalashnikov Optics Platform from Sabrewerks

Post by Toddstang » Mon Jun 09, 2014 9:17 pm

Nice. Certainly would be sweet on a Draco or sbr.

User avatar
mike@meridian
Posts: 72
Joined: Mon Dec 09, 2013 10:24 am
Location: KY
Has liked: 0
Been liked: 0
Contact:

Re: The Kalashnikov Optics Platform from Sabrewerks

Post by mike@meridian » Mon Jan 26, 2015 10:41 am

An interesting custom build we recently did on a Hungarian AMMS kit: This one has the KOP short rail option along with federal standard tan flat Moly Resin finish. Turned out very well.

Image
Meridian Ordnance LLC
07/02 SOT Gunsmithing, Refinishing & Sales
http://www.meridianordnance.com
Find us on Facebook at:
https://www.facebook.com/meridianordnance

Return to “Meridian Ordnance LLC”

×