Anti-walk pins

How to, troubleshooting, gun fixes, smithing issues, it all goes here.
User avatar
Dave1965
KAC Member
KAC Member
Posts: 9503
Joined: Sun Mar 04, 2012 8:56 am
Has liked: 0
Been liked: 23 times

Re: Anti-walk pins

Post by Dave1965 » Tue Feb 21, 2017 7:08 pm

iron369 wrote:The hammer spring was in its correct place.
You should probably do some grinding on the lower to remove any burrs that could be causing a problem.

:lol: :lol:

User avatar
iron369
KAC Member
KAC Member
Posts: 4787
Joined: Mon Feb 17, 2014 11:43 am
Location: Valley Station
Has liked: 73 times
Been liked: 96 times

Re: Anti-walk pins

Post by iron369 » Tue Feb 21, 2017 7:24 pm

Dave1965 wrote:
iron369 wrote:The hammer spring was in its correct place.
You should probably do some grinding on the lower to remove any burrs that could be causing a problem.

:lol: :lol:
Already had that done[FACE WITH TEARS OF JOY]
Using Tapatalk

Blackbird
KAC Member
KAC Member
Posts: 171
Joined: Thu Mar 22, 2012 5:43 pm
Location: Richmond
Has liked: 0
Been liked: 0
Contact:

Re: Anti-walk pins

Post by Blackbird » Fri Mar 17, 2017 6:42 pm

I did a lot of research before I built my 9mm AR. The issue with the pins is not only walking , but rotation. The KNS pins are anti-rotational and anti- walk. The 9mm cycles so fast it can rotate the pins.

Return to “The smithy”

×