Failed Glock Modifications

Forum for your two most popular Tupperware handguns. Glock and XD.
User avatar
WLJ
KAC Member
KAC Member
Posts: 30496
Joined: Sat Mar 03, 2012 8:55 pm
Location: Epsilon Eridani System
Has liked: 1 time
Been liked: 109 times

Failed Glock Modifications

Post by WLJ » Wed Jun 29, 2016 9:06 am

Wow

Now did the owner try his hand at doing this himself and after F'ing up decided to blame someone else or did he really get it back from the company in this condition?

Failed Glock Modifications By Experts
http://www.thefirearmblog.com/blog/2016 ... y-experts/
Last edited by WLJ on Wed Jun 29, 2016 9:50 am, edited 1 time in total.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.

User avatar
DDgunslinger
Posts: 3430
Joined: Sat Mar 03, 2012 8:10 pm
Location: Louisville
Has liked: 0
Been liked: 0
Contact:

Re: Failed Glock Modifications

Post by DDgunslinger » Wed Jun 29, 2016 9:42 am

The work seems shady and the comments are from key board warriors.... Love or Hate Glocks, either way... there is a whole lot of "Nope" in this link.

User avatar
ssracer
KAC Member
KAC Member
Posts: 13626
Joined: Sat Mar 03, 2012 8:24 pm
Location: KY
Has liked: 1 time
Been liked: 55 times
Contact:

Re: Failed Glock Modifications

Post by ssracer » Wed Jun 29, 2016 10:02 am

With what Zev charges I would highly doubt they did that. I wouldn't think a company doing high end glock mods would send out something that damn shitty. But who knows.

jackalo626
Global Mod
Global Mod
Posts: 12053
Joined: Sat Mar 03, 2012 8:50 pm
Location: Louisville
Has liked: 20 times
Been liked: 22 times

Re: Failed Glock Modifications

Post by jackalo626 » Wed Jun 29, 2016 1:57 pm

Pretty wild and unbelievable but I don't know the guy so maybe legit and they knew nobody would believe.

Sent from my SAMSUNG-SM-G870A using Tapatalk

jackalo626
Global Mod
Global Mod
Posts: 12053
Joined: Sat Mar 03, 2012 8:50 pm
Location: Louisville
Has liked: 20 times
Been liked: 22 times

Re: Failed Glock Modifications

Post by jackalo626 » Wed Jun 29, 2016 1:57 pm

I mean post your receipt or emails.

Sent from my SAMSUNG-SM-G870A using Tapatalk

User avatar
ssracer
KAC Member
KAC Member
Posts: 13626
Joined: Sat Mar 03, 2012 8:24 pm
Location: KY
Has liked: 1 time
Been liked: 55 times
Contact:

Re: Failed Glock Modifications

Post by ssracer » Wed Jun 29, 2016 3:34 pm

Updated:

Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.

User avatar
Wyldman
KAC Member
KAC Member
Posts: 6984
Joined: Sat Mar 03, 2012 8:01 pm
Location: Spring, TX
Has liked: 0
Been liked: 0

Re: Failed Glock Modifications

Post by Wyldman » Wed Jun 29, 2016 4:02 pm

ssracer wrote:Updated:

Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
And that person would be on the receiving end of a bill for a brand new slide and a serious ass-whipping if they so much as coughed when they got said bill.

I don't mind if someone fucks up, as long as they own it and do everything possible to make it right.

Crush, kill, mangle, maim, destroy.
IN GOD WE TRUST

"That boy's paradigm don't always add up to four nickels...."

User avatar
ssracer
KAC Member
KAC Member
Posts: 13626
Joined: Sat Mar 03, 2012 8:24 pm
Location: KY
Has liked: 1 time
Been liked: 55 times
Contact:

Re: Failed Glock Modifications

Post by ssracer » Wed Jun 29, 2016 4:16 pm

Wyldman wrote:
ssracer wrote:Updated:

Kane Kolisek of SK Arms reached out to me via email to set the story straight behind this slide cut fiasco. The slide was made by Zev Tech however they are not the one responsible for the screw up you see below. A local “gunsmith” is the one responsible for screwing this up terribly.
And that person would be on the receiving end of a bill for a brand new slide and a serious ass-whipping if they so much as coughed when they got said bill.

I don't mind if someone fucks up, as long as they own it and do everything possible to make it right.

Crush, kill, mangle, maim, destroy.
Especially since a Zev slide will run you more than a whole new Glock

User avatar
WLJ
KAC Member
KAC Member
Posts: 30496
Joined: Sat Mar 03, 2012 8:55 pm
Location: Epsilon Eridani System
Has liked: 1 time
Been liked: 109 times

Re: Failed Glock Modifications

Post by WLJ » Wed Jun 29, 2016 5:17 pm

that first slide with the JB Weld was NOT done by ZEV. The slide was a ZEV product, but the work was done by a local firearms shop with a long history of fucking things up. They’ve recently been raided by the ATF. Seems they’re as good with paper work as they are with the guns they work on, and continue to work on even after the ATF raid. Their name is Metal EFX, feel free to give them a google.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.

User avatar
son of liberty
KAC Member
KAC Member
Posts: 1759
Joined: Sat Mar 03, 2012 9:22 pm
Location: Carrollton
Has liked: 0
Been liked: 0

Re: Failed Glock Modifications

Post by son of liberty » Wed Jun 29, 2016 9:13 pm

Gucci glocks......booooo
Image

guncrank1
KAC Member
KAC Member
Posts: 6380
Joined: Sat Mar 03, 2012 8:48 pm
Location: Metro Louisville
Has liked: 3 times
Been liked: 15 times
Contact:

Re: Failed Glock Modifications

Post by guncrank1 » Thu Jun 30, 2016 3:01 pm

So that is where that slide went.

User avatar
ssracer
KAC Member
KAC Member
Posts: 13626
Joined: Sat Mar 03, 2012 8:24 pm
Location: KY
Has liked: 1 time
Been liked: 55 times
Contact:

Re: Failed Glock Modifications

Post by ssracer » Thu Jun 30, 2016 3:06 pm

guncrank1 wrote:So that is where that slide went.
lol

User avatar
Toecutter1978
KAC Member
KAC Member
Posts: 10474
Joined: Sun Oct 27, 2013 8:08 pm
Location: Brooks
Has liked: 0
Been liked: 14 times

Re: Failed Glock Modifications

Post by Toecutter1978 » Fri Jul 01, 2016 3:09 pm

Some of the Comments are gold! Niceguy was laughing at me when I looking at the pics, backyard smithing.

Return to “XD & Glock”

×