Budget plasma cutter...

Think of the cool gadgets we all love, this would be the place to post about them.
User avatar
KYGlassman
KAC Member
KAC Member
Posts: 251
Joined: Sun Mar 04, 2012 8:13 pm
Location: On a ridge in Western KY
Has liked: 0
Been liked: 0
Contact:

Budget plasma cutter...

Post by KYGlassman » Mon Jan 30, 2017 11:12 am

I decided to start welding mostly to assemble my own AR500 steel targets. I did my first welding this weekend with a 110 Hobart flux core welder that Tractor Supply had on sale and it worked wonderfully. I was making servicable welds in no time, even if they wouldn't win any beauty contests.

There are a slew of Chinese plasma cutters out there. From there the price for one gets beyond what I'm willing to spend to upgrade from cutting with an angle grinder.

Do any of you have any first hand experience with the cheapo plasma cutters?

User avatar
PDM
KAC Member
KAC Member
Posts: 5789
Joined: Thu Oct 30, 2014 5:17 pm
Location: Bardstown
Has liked: 87 times
Been liked: 44 times

Re: Budget plasma cutter...

Post by PDM » Mon Jan 30, 2017 1:03 pm

Get on pirate4x4.com. I bought my 50A plasma from a vendor on there that was fixing up the Chinese units. It runs like a champ with a decent quality torch
"The unlimited power of the sword is not in the hands of either the federal or the state governments, but, where I trust in God it will ever remain, in the hands of the people."
Tench Coxe

User avatar
Jff24Gordn
KAC Member
KAC Member
Posts: 809
Joined: Sat Mar 03, 2012 10:14 pm
Location: Hodgenville
Has liked: 0
Been liked: 0

Re: Budget plasma cutter...

Post by Jff24Gordn » Mon Jan 30, 2017 4:14 pm

I picked up a hypertherm 800 12 years ago that was a rental unit that prax air in Madison was retiring for $300. For what I do, it's great.

Rem700
KAC Member
KAC Member
Posts: 13258
Joined: Sun Mar 04, 2012 9:47 am
Location: Definitely at my soul crushing job!
Has liked: 109 times
Been liked: 55 times

Re: Budget plasma cutter...

Post by Rem700 » Mon Jan 30, 2017 4:38 pm

I was going to suggest calling local rental places. They sell them once they start getting beat up at times but that doesn't mean they dont still work just fine.

User avatar
KYGlassman
KAC Member
KAC Member
Posts: 251
Joined: Sun Mar 04, 2012 8:13 pm
Location: On a ridge in Western KY
Has liked: 0
Been liked: 0
Contact:

Re: Budget plasma cutter...

Post by KYGlassman » Mon Jan 30, 2017 4:49 pm

Is that the razorweld unit? I found a vendor selling those on Pirate.

User avatar
PDM
KAC Member
KAC Member
Posts: 5789
Joined: Thu Oct 30, 2014 5:17 pm
Location: Bardstown
Has liked: 87 times
Been liked: 44 times

Re: Budget plasma cutter...

Post by PDM » Mon Jan 30, 2017 6:38 pm

KYGlassman wrote:Is that the razorweld unit? I found a vendor selling those on Pirate.
No but this was a number of years ago. Just see what a lot of guys are using on the and you should be safe
"The unlimited power of the sword is not in the hands of either the federal or the state governments, but, where I trust in God it will ever remain, in the hands of the people."
Tench Coxe

User avatar
richief
Posts: 669
Joined: Fri Aug 24, 2012 12:38 pm
Location: S.E. KY's Apple-Latcha Mts
Has liked: 2 times
Been liked: 1 time
Contact:

Re: Budget plasma cutter...

Post by richief » Mon Jan 30, 2017 11:45 pm

Don't discount the value of owning an oxy acetylene outfit, much more versatile than a plasma cutter and the haz isn't bad if you use the correct tip, and don't hang around. I have both but I would lose the plasma before I would give up the torch.

User avatar
Gunsmokin
KAC Member
KAC Member
Posts: 5076
Joined: Wed Jul 25, 2012 9:11 pm
Location: Louisville
Has liked: 1 time
Been liked: 20 times

Re: Budget plasma cutter...

Post by Gunsmokin » Tue Jan 31, 2017 6:26 am

Ahhh, the ole' gas hatchet!
jackalo626 wrote:Skibble dee dibbledy

User avatar
Gunsmokin
KAC Member
KAC Member
Posts: 5076
Joined: Wed Jul 25, 2012 9:11 pm
Location: Louisville
Has liked: 1 time
Been liked: 20 times

Re: Budget plasma cutter...

Post by Gunsmokin » Tue Jan 31, 2017 6:26 am

Or, the GDT, as we used to say. Got Damn Torch.
jackalo626 wrote:Skibble dee dibbledy

User avatar
plumber_bob
KAC Member
KAC Member
Posts: 6747
Joined: Sun Feb 02, 2014 2:25 pm
Location: L.J. Ky
Has liked: 173 times
Been liked: 79 times

Re: Budget plasma cutter...

Post by plumber_bob » Tue Jan 31, 2017 9:32 am

Flame wrench is what I always heard it called.


pb
"One Man With Courage is a Majority"

User avatar
richief
Posts: 669
Joined: Fri Aug 24, 2012 12:38 pm
Location: S.E. KY's Apple-Latcha Mts
Has liked: 2 times
Been liked: 1 time
Contact:

Re: Budget plasma cutter...

Post by richief » Tue Jan 31, 2017 10:31 am

Yep, when all else fails break out the fire wrench. Lol

User avatar
KYGlassman
KAC Member
KAC Member
Posts: 251
Joined: Sun Mar 04, 2012 8:13 pm
Location: On a ridge in Western KY
Has liked: 0
Been liked: 0
Contact:

Re: Budget plasma cutter...

Post by KYGlassman » Tue Jan 31, 2017 8:21 pm

A torch may be a fine idea. Can you set them up to make fairly clean cuts? I've been assuming they would only produce edges with globs of metal that had to be ground smooth and straight.

User avatar
Jff24Gordn
KAC Member
KAC Member
Posts: 809
Joined: Sat Mar 03, 2012 10:14 pm
Location: Hodgenville
Has liked: 0
Been liked: 0

Re: Budget plasma cutter...

Post by Jff24Gordn » Tue Jan 31, 2017 9:30 pm

Practice. You can make some extremely clean cuts with a torch if you work at it.
I used to work at a semi shop and a guy there had a motorized torch on a track and he cut 2" steel plate and it was clean.

If you are learning, get plenty of grinder wheels.

User avatar
richief
Posts: 669
Joined: Fri Aug 24, 2012 12:38 pm
Location: S.E. KY's Apple-Latcha Mts
Has liked: 2 times
Been liked: 1 time
Contact:

Re: Budget plasma cutter...

Post by richief » Tue Jan 31, 2017 11:15 pm

Absolutely they will cut clean, I do give a few points to plasma here but definitely not a short run fabrication issue. Both will probabbly warrant dressing sharp edges with the grinder anyhow. If you tinker with other stuff, work on your own vehicle, etc., a torch setup is a handy tool to have.

ken6881
KAC Member
KAC Member
Posts: 800
Joined: Sat Feb 09, 2013 10:03 pm
Location: henderson/louisville,ky
Has liked: 0
Been liked: 0

Budget plasma cutter...

Post by ken6881 » Thu Feb 02, 2017 9:04 am

I really like the 50a cut 50 d I bought off eBay about 250$ and cuts well for the price. Used over 3 years heavily and the only thing I would like is a better torch.

Long term plasma will be cheaper than a torch set and bottles.
Ky CCDW Instructor

Return to “Other guy stuff”

×