Steel Targets

Boots, packs, mag pouches, clothes, pens, whatever tactical gear you can think of discuss here.
User avatar
Whootsinator
Little Butthole
Posts: 3128
Joined: Sun Mar 04, 2012 2:04 am
Location: Northern Kentucky
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by Whootsinator » Thu Jan 21, 2016 10:10 pm

I wouldn't call it absolutely necessary if you have quality, undamaged plates (I agree with you there, smooth plates are key) and I don't even think downward angled plates are necessarily the norm. There are plenty of people who shoot more than I do on this forum, and I've been hit by fragments coming off of AR500 steel twice in the last two years. It never broke skin, but having had it happen twice I would GREATLY prefer downward angled clean steel targets.
"I don't retreat; I kick ass in the other direction."

User avatar
PDM
KAC Member
KAC Member
Posts: 5789
Joined: Thu Oct 30, 2014 5:17 pm
Location: Bardstown
Has liked: 87 times
Been liked: 44 times

Re: Steel Targets

Post by PDM » Thu Jan 21, 2016 10:17 pm

FYI. All blazer brass ammo is plated if anyone needs non jacketed
"The unlimited power of the sword is not in the hands of either the federal or the state governments, but, where I trust in God it will ever remain, in the hands of the people."
Tench Coxe

User avatar
RecoilSensitive
KAC Member
KAC Member
Posts: 3912
Joined: Sun Mar 04, 2012 1:10 pm
Location: Louisville
Has liked: 1 time
Been liked: 2 times

Re: Steel Targets

Post by RecoilSensitive » Fri Jan 22, 2016 10:38 am

Most of my pistol loads are plated. I have been hit at tg&go when we used to have matched there. When we had those start plates a 9mm came back and got me in the stomach.

No biggie other than a little bruise and a scare.

The plates I am getting are AR500. and they would be set out 50 yards or so. Would take both pistol and .223.
"But now," he said, "take your money and a traveler's bag. And if you don't have a sword, sell your cloak and buy one" -Jesus (Luke 22:36 NLT)

User avatar
Frailer
KAC Member
KAC Member
Posts: 2676
Joined: Sat Mar 03, 2012 8:46 pm
Location: Meade County
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by Frailer » Fri Jan 22, 2016 1:22 pm

FWIW, here's what M193 will do to AR500 at 50 yards:

https://www.ocabj.net/m193-on-ar500-steel-at-50-yards/

User avatar
gaston_kalash
Posts: 867
Joined: Fri Sep 27, 2013 11:09 pm
Location: somerset
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by gaston_kalash » Fri Jan 22, 2016 2:07 pm

Frailer wrote:FWIW, here's what M193 will do to AR500 at 50 yards:

https://www.ocabj.net/m193-on-ar500-steel-at-50-yards/
i have a ar500 plate I shoot semi regularly with m193 at roughly 30 yards and it's just fine. Not one crater or dent. However the rounds are coming out of a 10.5" barrel. I've shot it with everything from .22lr to 7.62x39 and never have had an issue other than sometimes I'll get some shrapnel from 22lr but never hae ha an injury but I always wear eye and ear pro. The 7.62x39 came out of a 16" barrel but shot it at around 50 yards. I bought the target from midway and it just hangs on 2 chains.

I think a lot of the cratering issues come from the quality of the steel and manfuractuerer. I bought a target from dunhams that's ar500 but only rated for handguns up to 44 mag and it is cratered like crazy from just 9mm. I'd post pics but tapatalk freezes every time I go to post a pic.
SI JE PUIS

User avatar
Frailer
KAC Member
KAC Member
Posts: 2676
Joined: Sat Mar 03, 2012 8:46 pm
Location: Meade County
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by Frailer » Fri Jan 22, 2016 3:07 pm

Two excellent points:

- Velocity is the enemy here (since energy is a function of the square of velocity); a round leaving the muzzle of a 10.5" barrel is traveling at roughly the same velocity as the same round fired from a 16" barrel at 100 yards.

- Not all "AR500" targets are created equal. Even if the supplier is completely honest about the hardness of his product, the act of cutting the target from the sheet can soften the steel appreciably--particularly at the edges. Most of my steel came from a guy who cuts with a water jet to avoid this problem.

User avatar
rustynuts
KAC Member
KAC Member
Posts: 14108
Joined: Sun Feb 10, 2013 8:29 pm
Location: Bardstown
Has liked: 46 times
Been liked: 78 times

Re: Steel Targets

Post by rustynuts » Sat Jan 23, 2016 1:24 am

Niceguy wrote:
Frailer wrote:I think your ideal setup would depend on whether you plan to leave your targets in place or haul them back and forth to the range.

FWIW, I like to have some static steel (for practicing multiple shots on target) and some swinging/moving.

I'll also warn you that steel targets are sort of like guns or ammo: you'll always want more.
Absolutely this...
They multiply like rabbits. My one has become five.

Joe
KAC Member
KAC Member
Posts: 597
Joined: Sun Mar 04, 2012 8:59 am
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by Joe » Sat Jan 23, 2016 8:21 am

Use a big enough rifle round and just punch through, for those that remember that shoot.

User avatar
HEYOPEY
Posts: 345
Joined: Sun Apr 21, 2013 11:13 pm
Location: Whitley City, KY
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by HEYOPEY » Tue Feb 02, 2016 11:07 pm

ShootSteel.com Hangers with D.I.Y. Stands. The center is TragertMan LLC 22° mount.
IMG_2394.JPG

User avatar
Niceguy
KAC Member
KAC Member
Posts: 14178
Joined: Thu Apr 05, 2012 2:57 pm
Location: Smithfield Ky
Has liked: 328 times
Been liked: 91 times

Re: Steel Targets

Post by Niceguy » Wed Feb 03, 2016 9:04 am

Shit me and a buddy threw together with scrape partly of mine and partly from his junk piles. I think the only thing I bought was the chains.
uploadfromtaptalk1454508241904.jpg

User avatar
RecoilSensitive
KAC Member
KAC Member
Posts: 3912
Joined: Sun Mar 04, 2012 1:10 pm
Location: Louisville
Has liked: 1 time
Been liked: 2 times

Re: Steel Targets

Post by RecoilSensitive » Wed Feb 03, 2016 10:31 am

The steel this guy uses is military overrun and reads 550 on hardness scale. It is CNC cut under 2" of water to controls heat. Looks nice. I will see how it does at the shoot. Guy is an officer in the Army and someone I have known since high school.
"But now," he said, "take your money and a traveler's bag. And if you don't have a sword, sell your cloak and buy one" -Jesus (Luke 22:36 NLT)

User avatar
Dustin
KAC Member
KAC Member
Posts: 3130
Joined: Sun Mar 04, 2012 12:47 pm
Location: Lost in Space
Has liked: 4 times
Been liked: 39 times

Re: Steel Targets

Post by Dustin » Wed Feb 03, 2016 10:36 am

I have made a few steel targets out of cold roll. It holds up to pistol rounds but 223 leaves a crater and 243 looks like you cut it with a laser.
"What country can preserve its liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance. Let them take arms." Thomas Jefferson

samb.
Posts: 539
Joined: Wed Jan 23, 2013 5:28 pm
Location: Louisville
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by samb. » Fri Feb 12, 2016 5:26 pm

So I am looking for some targets. Planning on dropping around a grand for a bunch. Would like a swinging plate rack and some more single silhouette targets. Who has the best deal? I would like to stick with 3/8" ar500 so I can shoot them with 5.56 and slower stuff.

Edit: Local would be better so I can just pick them up to cut shiping costs down.

User avatar
Whootsinator
Little Butthole
Posts: 3128
Joined: Sun Mar 04, 2012 2:04 am
Location: Northern Kentucky
Has liked: 0
Been liked: 0

Re: Steel Targets

Post by Whootsinator » Fri Feb 12, 2016 5:45 pm

http://www.challengetargets.com/

Challenge Targets is in Northern Kentucky, if you're willing to drive up here. They have pretty regular email specials and a lot of options. I'd check out their site and give them a call to discuss details if you like what you see.
"I don't retreat; I kick ass in the other direction."

Return to “Tactical Gear”

×