My attempt at modding a 10/22 stock

Post by **etownguy** » Sat Mar 23, 2013 4:19 pm

I decided I wanted to use the original carbine stock from my 10/22 on a tac sol barrel. Using 60 grit paper and a deep well socket this took ages to open up the channel. I also cut down the end of the stock. Here is my progress so far.

I have some more tricks for the butt end but no pics till I get it cleaned up kind of looks mangled right now

Post by **JustShootIt** » Sat Mar 23, 2013 5:07 pm

Nice start...

Like to see finish product

Post by **Wyldman** » Sat Mar 23, 2013 5:17 pm

Lotta work, but when it works, it feels real good, no?

Post by **etownguy** » Sat Mar 23, 2013 5:52 pm

If someone local has a takedown bolt I could that would be very helpful.

Eireguy · Post by **Eireguy** » Sat Mar 23, 2013 6:09 pm

Lookin' good

Post by **Dead-OnSniperService** » Sat Mar 23, 2013 7:14 pm

Wow. Very nice.

Sent with 650g at 3,044fps

Post by **etownguy** » Sat Mar 23, 2013 9:16 pm

Post by **etownguy** » Sat Mar 23, 2013 9:19 pm

I like it so far there was much work involved in the butt stock it still isn't perfect but my wrists hurt from sanding so much. I dig the bare wood color so I am going to try to find a clear sealer instead of stain or varnish.

Need to order a bedding kit and a new takedown screw tonight.

Post by **burn360** » Sat Mar 23, 2013 9:47 pm

i hope it will stand up to the heavy recoil :llama:

Post by **etownguy** » Sat Mar 23, 2013 10:26 pm

I know I may have to start shooting light loads only!

Post by **86 slo-vo** » Sun Mar 24, 2013 1:05 am

I like it.

Post by **guncrank1** » Sun Mar 24, 2013 5:42 am

Nice
Not my thing but good work

Post by **etownguy** » Sat Mar 30, 2013 7:49 pm

Here it is finished massive props to jonwoo's for sending me a take down screw!! Not sure what it weighs but I'll guesstimate sub 4lbs with the scope on it.
I finished the wood with Deft spray clear wood finish because I liked the light color.
Need to pick up new scope rings to get it lower these were all I had laying around.

Post by **etownguy** » Sat Mar 30, 2013 7:51 pm

And the ghetto cheek rest. It is just a piece of pipe insulation I found

Post by **GeminiXD9** » Sat Mar 30, 2013 7:57 pm

I like that man. Looks good.

Post by **Jonwoos** » Sat Mar 30, 2013 8:02 pm

Looks good!

You are welcome for the bolt, I have several extra. Changed mine over to socket head cap screws (Allen head)

Post by **Wyldman** » Sat Mar 30, 2013 8:14 pm

I was rumaging around in my parts box and found 4 of the action bolts the day after the Woowoo committed to give you one. If anyone else needs one, sing out, I've got plenty, and now, I even know where they are! I like the decision to go light on the finish. I opted to do the same on the Savage I'm currently working on.

Post by **Dustin** » Sat Mar 30, 2013 8:57 pm

etownguy wrote:And the ghetto cheek rest. It is just a piece of pipe insulation I found

ImageUploadedByTapatalk1364687459.013154.jpg

I was thinking para chord wrap. For the cheek rest.

Sent from my iPad using Tapatalk

Post by **Dustin** » Fri Apr 12, 2013 10:56 am

Hey how did you cut out the stock? I was thinking about doing that to a carbine I have.

Post by **etownguy** » Fri Apr 12, 2013 1:45 pm

Jigsaw knife rasp sandpaper

Post by **Dustin** » Fri Apr 12, 2013 1:58 pm

Need a rasp and a take off stock.

Cool might have a few more questions later.

Kentucky Armory Club

My attempt at modding a 10/22 stock

My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Re: My attempt at modding a 10/22 stock

Login • Register