Page 1 of 1
10/22 stock mod
Posted: Fri Jun 05, 2015 11:01 am
by Niceguy
I bought a freaking awesome factory Ruger DSP stock and need to modify if to fit a .920 barrel. What is the best way to do this? Is there a special tool, or maybe a broom handle with some 40-80gr sandpaper on it? Also what is the best way to tell if it's touching anywhere? It there a powder or washable dye to help tell?
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 11:22 am
by justang1997
Broom handle sounds good. Just loop a dollar bill around barrel and slide it up to the receiver and anywhere the bill gets stuck is where the stock touches.
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 11:32 am
by Niceguy
Cool. Thanks
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 11:42 am
by Livewire
Woowoo told me a really good way to do it. Wrap sand paper around a socket and start cutting it down. I've done it twice with good success.
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 11:51 am
by Niceguy
Awesome! That sounds like an even better idea...
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 1:38 pm
by guncrank1
I use a barrel rasp and a scraper with a round blade.
Like J stag97 said a piece of paper for a gauge.
Re: 10/22 stock mod
Posted: Fri Jun 05, 2015 7:33 pm
by Gunsmokin
Chainsaw