Page 7 of 8

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 12, 2017 9:25 pm
by Niceguy
First 15rds at a slow pace, maybe 30-45 sec total. Image

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 12, 2017 11:00 pm
by Dave1965
I had trouble with the trigger too...and it was a long reach to use the trigger for my short fingers. The majority of my shots were directly to the left of the target, likely indicating the reach to the trigger problem for me.

Re: CZ P10 Striker Fired Handgun

Posted: Wed Jun 14, 2017 1:26 pm
by jabba21
Mine just arrived. Initial impression: I love the ergonomics. Texturing is nice. The magazine release is very stiff and the trigger is a little gritty. I'll get the grease cleaned up and try and get some shots later.


Sent from my iPhone using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Wed Jun 14, 2017 2:17 pm
by Whootsinator
So far everyone's mag and slide releases break in nicely, though they might be super stiff at first. Gritty trigger from the factory hasn't been uncommon, thoroughly cleaning and lubricating fixes it. Obviously shooting a few hundred rounds should only make everything better.

Re: CZ P10 Striker Fired Handgun

Posted: Wed Jun 14, 2017 3:47 pm
by jabba21
Cleaned and lubed. Only have 60 rounds through it. No issues. Trigger and mag release are already smoothing out. Seems to be pretty flat shooting. It fits inside my NSR Tactical IWB holster but not my Raven Concealment OWB.


Sent from my iPhone using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Wed Jun 14, 2017 4:13 pm
by Niceguy
Mag release is still stiff on this one, lefty it VERY!! stiff.

Sent from my SM-N920V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 11:46 am
by kymarkh
Anyone able ro verify if this one fits in a G19 Eidolon?

Sent from my SM-G930V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 1:10 pm
by Whootsinator
I've heard it's very stiff in an Eidolon, unfortunately. That's my favorite holster. WML holsters for a G19 seem MUCH more likely to fit. I wish they'd make a WML Eidolon.

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 1:12 pm
by kymarkh
Thanks. Hoping for the best as i just picked up a used one. It will not fit my G19 Phantom well enough to be usable.

Sent from my SM-G930V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 1:38 pm
by ssracer
Whootsinator wrote:I've heard it's very stiff in an Eidolon, unfortunately. That's my favorite holster. WML holsters for a G19 seem MUCH more likely to fit. I wish they'd make a WML Eidolon.
been awaiting an XC1 compatible Eidolon for over a year...what did they release? A limited edition clear Eidolon....who the fuck wanted that?

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 2:33 pm
by Whootsinator
I forget why they did that, but it was for particular reason... Meh, not my thing.

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 3:02 pm
by Whootsinator
Mark, I just found someone else saying the P10C fits an Eidolon like it was made for it. Final answer.... who knows?? If you have a P10, I have an Eidolon.

Re: CZ P10 Striker Fired Handgun

Posted: Thu Jun 15, 2017 5:22 pm
by kymarkh
That would be awesone, if mine doesnt arrive soon will take you up on that. Thanks!

Sent from my SM-G930V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Sat Jun 17, 2017 5:58 pm
by kymarkh
My eidolon arrived today and the p10c is a no go, too much open trigger area showing when its in the holster. Works great with the rmr'd G19 though

Sent from my SM-G930V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 19, 2017 10:36 pm
by kymarkh
Another 250 thru it tonight. Slide release and mag release smoothing out nicely, this thing really ejects the mags with authority. Like it best with the small backstrap and for what it's worth mine was dated April 13th and has a '3' front sight installed.

Sent from my SM-T377V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 19, 2017 10:40 pm
by kymarkh
Eidolon trigger guard bummage... too much open area for my tastes. Will certainly use it with my G19 though.Image

Sent from my SM-T377V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 19, 2017 11:54 pm
by Whootsinator
Yeah, that's not acceptable for use to me. I wonder if a G17 Eidolon would fit.

Re: CZ P10 Striker Fired Handgun

Posted: Sun Jun 25, 2017 10:02 pm
by Bama
I will have holster for it if my p10 ever arrives.

Re: CZ P10 Striker Fired Handgun

Posted: Sun Jun 25, 2017 10:19 pm
by kymarkh
Cool

Sent from my SM-T377V using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Mon Jun 26, 2017 9:39 am
by ssracer
Whootsinator wrote:Yeah, that's not acceptable for use to me. I wonder if a G17 Eidolon would fit.
I doubt it....I think the 19 eidolon is basically the 17 eidolon with the bottom cut off

Re: CZ P10 Striker Fired Handgun

Posted: Fri Jul 21, 2017 7:17 pm
by Bama
Image

Image


Sent from my iPhone using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Fri Jul 21, 2017 10:12 pm
by ssracer
Are you molding in the bump now?


Sent from my iPad using Tapatalk Pro

Re: CZ P10 Striker Fired Handgun

Posted: Fri Jul 21, 2017 11:07 pm
by Bama
ssracer wrote:Are you molding in the bump now?


Sent from my iPad using Tapatalk Pro
I am not. These are designed by one of the best in the biz. I am simply folding and assembling hardware. Another maker has designed, formed, and trimmed.


Sent from my iPhone using Tapatalk

Re: CZ P10 Striker Fired Handgun

Posted: Sat Jul 22, 2017 12:53 pm
by bigelowe
Tilfords has one for $483.95. If anyone is interested.

Re: CZ P10 Striker Fired Handgun

Posted: Sat Jul 22, 2017 12:56 pm
by WLJ
A question to those who have bought or handled a P-10, how easy is it for a woman to rack one say compared to Glock 19? I'm asking because my daughter has trouble with racking most semi-autos