More Kel-Tec Unicorns on the way

[Phil_Osophy]

That is one ugly piece.

Now this is ugly

is that ome of those convertbles?

[WLJ]

That is one ugly piece.

Now this is ugly

is that ome of those convertbles?

Conversion yes, it is kit installed on a base AK-47
Most were sold with the kit already installed, how I bought mine, but the kit could be ordered separately. I recall reading on the bullpup forum the kit is not currently being made. Only real issue is the choice of linkage they made for the trigger, think coat hanger wire, it flexes far too much giving it a crappy trigger, although while shooting it's not as noticeable as while dry firing it. There's some fixes for it on the internet but it's been a low priority for me on the to do list.
They also did AK-74s but they were done a bit different from the AK-47 ones in that they didn't have iron sights and had a rail installed instead, looked a lot better IMHO. Tried to get ahold of one them but haven't had any luck yet, though they have popped up on gunbroker from time to time.

BTW: Bullpups designed from the ground up as bullpups are usually vastly superior to conversions like the above, so don't judge bullpups by a conversion.

[Mike]

This thread is full of fail!

[jackalo626]

This thread is full of fail!

truth

[WLJ]

Bullpups are the discriminated against minority around here. Where's Jessie Jackson and Al Sharpton when you need them?

[WLJ]

Of course with many bullpups as ugly as they are with me it's a matching set.

[jackalo626]

Of course with many bullpups as ugly as they are with me it's a matching set.

lol. I don't dislike them all and actually think some are cool and have a place. Ps90=cool RFB=cool AUG=cool

[adayton]

Just got through the latest issue of RECOIL magazine this month ... and Guess what they are reviewing ... Along with the IWI Tavor RATWORX Bullpup?

It's an RDB 5.56 ... And they were fairly impressed with it ...

Actually, they both look pretty nice ... I can see why WLJ shows a little favoritism toward those short guys ....

LInk for the RDB:
http://www.recoilweb.com/preview-kel-te ... 57105.html
Link for the IWI RATWORX:
http://www.recoilweb.com/preview-rat-wo ... 57261.html

[WLJ]

Just got through the latest issue of RECOIL magazine this month ... and Guess what they are reviewing ... Along with the IWI Tavor RATWORX Bullpup?

It's an RDB 5.56 ... And they were fairly impressed with it ...

Actually, they both look pretty nice ... I can see why WLJ shows a little favoritism toward those short guys ....

LInk for the RDB:
http://www.recoilweb.com/preview-kel-te ... 57105.html
Link for the IWI RATWORX:
http://www.recoilweb.com/preview-rat-wo ... 57261.html

Site has a look into the internals and it would appear, to me at least, they started out with an RFB and went from there. One major different though is that the RFB ejects forward just like on the F/FS2000, while the RDB ejects down and to the rear, which is closer to what a P/PS90 does although the 90 ejects straight down which is made possible by the fact the mag is above the chamber area on the 90

[guncrank1]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

[WLJ]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

[ssracer]

Always wanted a PS90....but it would have to be SBR

[Dave1965]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

buy the shorter barrel

[Toecutter1978]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

Every time I see or hear of one of those, I always think of Stargate.

[ssracer]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

Every time I see or hear of one of those, I always think of Stargate.

lol...that's what always made me want one

[Toecutter1978]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

Every time I see or hear of one of those, I always think of Stargate.

lol...that's what always made me want one

I want Major Carter to instruct me in proper weapon handling. Lol

[Dave1965]

RFB too damn expensive for kel-tec. The KSG is bad enough.

[ssracer]

RFB too damn expensive for kel-tec. The KSG is bad enough.

kinda like a $60,000 Kia K9000

[WLJ]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

buy the shorter barrel

Being going back and fore about SBRing mine but every I see the ballistics of the 10.4" vs the 16" I decide to keep it at 16".

Besides this is working fine

[ssracer]

The biggest drawback to the PS90 is the issue of height over bore. I've watched videos where they would sight it in at one distance, then at a different distance they were barely even on paper

[Niceguy]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

buy the shorter barrel

Being going back and fore about SBRing mine but every I see the ballistics of the 10.4" vs the 16" I decide to keep it at 16".

Besides this is working fine

I like that!

[Toecutter1978]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

buy the shorter barrel

Being going back and fore about SBRing mine but every I see the ballistics of the 10.4" vs the 16" I decide to keep it at 16".

Besides this is working fine

Now all you need is a Jaffa staff weapon!

[guncrank1]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

If you don't mind me asking how much is that costing?

buy the shorter barrel

The owner already did and a fancy suppreser mount/flash hider

[guncrank1]

I have a PS-90 to SBR in the shop , now that is a pretty cool bullpup.

Every time I see or hear of one of those, I always think of Stargate.

lol...that's what always made me want one

I want Daniel to instruct me in proper weapon handling. Lol

Fixed it for you

[WLJ]

Back and fore????

Stupid spell checker