HiperTouch on Board at Stamler Machine

For all your parts and firearm needs.

Moderators: adayton, Stamler Machine

adayton
Posts: 750
Joined: Thu Nov 08, 2012 12:40 pm
Location: Between Cabela's and Crestwood
Has liked: 0
Been liked: 0

HiperTouch on Board at Stamler Machine

Post by adayton » Wed Mar 11, 2015 10:30 pm

Just got hooked up with HiperTouch ... You can read about their triggers here:
http://www.hiperfire.com/products/

And here are the KAC member prices with MSRP and MAP prices to compare to...
I won't be stocking at first, but if any one trigger gets 'hot', I may try to keep one or two in stock ...
hiperfire pricing.jpg
hiperfire pricing.jpg (28.26 KiB) Viewed 2480 times
Thanx,
Allan Dayton
Stamler Machine
502-228-8871 -- Home/Office
502-572-5356 -- Mobile

User avatar
Vividia
KAC Member
KAC Member
Posts: 1413
Joined: Sun Mar 04, 2012 11:35 am
Location: Louisville, KY
Has liked: 0
Been liked: 1 time

Re: HiperTouch on Board at Stamler Machine

Post by Vividia » Wed Mar 11, 2015 10:47 pm

nice addition Allan. These are terrific triggers in my opinion. And nice prices too :)
Mexican Kerry wrote:Except for Viv. I predict she will be the leader of a group that roams the countryside pillaging for survival.
It is hardly too strong to say that the Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters. - Daniel Webster

User avatar
dbh
KAC Member
KAC Member
Posts: 5219
Joined: Thu Mar 22, 2012 12:33 pm
Location: The Twilight Zone
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by dbh » Wed Mar 11, 2015 10:54 pm

Good price on a great trigger. I have (2) 24C's...love them!
Image

User avatar
ssracer
KAC Member
KAC Member
Posts: 13627
Joined: Sat Mar 03, 2012 8:24 pm
Location: KY
Has liked: 1 time
Been liked: 55 times
Contact:

Re: HiperTouch on Board at Stamler Machine

Post by ssracer » Thu Mar 12, 2015 10:37 am

Very nice. I've got to play with one but not shoot with one

adayton
Posts: 750
Joined: Thu Nov 08, 2012 12:40 pm
Location: Between Cabela's and Crestwood
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by adayton » Thu Mar 12, 2015 11:47 am

I think I may get a few of the models in and offer the chance for members to 'try before you buy'...
I'll get them in and then figure out details on how we can handle the 'test drives'
Saw it done with Geissele on another forum and looked like a good idea...

User avatar
Whootsinator
Little Butthole
Posts: 3128
Joined: Sun Mar 04, 2012 2:04 am
Location: Northern Kentucky
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by Whootsinator » Thu Mar 12, 2015 11:51 am

How would you say they compare to Geissele? Anyone here shot comparable models from both companies?
"I don't retreat; I kick ass in the other direction."

User avatar
dbh
KAC Member
KAC Member
Posts: 5219
Joined: Thu Mar 22, 2012 12:33 pm
Location: The Twilight Zone
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by dbh » Thu Mar 12, 2015 12:17 pm

I replaced a Giselle with a Hiperfire on my Mark 12
Image

User avatar
son of liberty
KAC Member
KAC Member
Posts: 1759
Joined: Sat Mar 03, 2012 9:22 pm
Location: Carrollton
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by son of liberty » Thu Mar 12, 2015 12:32 pm

adayton wrote:I think I may get a few of the models in and offer the chance for members to 'try before you buy'...
I'll get them in and then figure out details on how we can handle the 'test drives'
Saw it done with Geissele on another forum and looked like a good idea...
I would like to try one.

I tested out the Geissele SD3G last week and was completely disappointed
Image

adayton
Posts: 750
Joined: Thu Nov 08, 2012 12:40 pm
Location: Between Cabela's and Crestwood
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by adayton » Thu Mar 12, 2015 1:05 pm

Whootsinator wrote:How would you say they compare to Geissele? Anyone here shot comparable models from both companies?
I have never tried either....at this point.
I am going to procure both brands now and have them available for testing.
I'll keep you all updated here...
Thanx for the input DBH and SOL

User avatar
Vividia
KAC Member
KAC Member
Posts: 1413
Joined: Sun Mar 04, 2012 11:35 am
Location: Louisville, KY
Has liked: 0
Been liked: 1 time

Re: HiperTouch on Board at Stamler Machine

Post by Vividia » Thu Mar 12, 2015 8:31 pm

I have the Geissele SSA in my carbine and hiperfire in my 20 inch heavy barrel. I like them both a lot and won't swap out the Geissele. The hiperfire is terrific for precise work. Very crisp and clean break.
Mexican Kerry wrote:Except for Viv. I predict she will be the leader of a group that roams the countryside pillaging for survival.
It is hardly too strong to say that the Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters. - Daniel Webster

User avatar
Wyldman
KAC Member
KAC Member
Posts: 6984
Joined: Sat Mar 03, 2012 8:01 pm
Location: Spring, TX
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by Wyldman » Thu Mar 12, 2015 9:57 pm

I'd be interested in trying the EDT (the only one I can afford, right now) on my .300BLK, looking for a fast, clean, mid-weight pull, single stage trigger. Does anyone have one I could look at?
IN GOD WE TRUST

"That boy's paradigm don't always add up to four nickels...."

adayton
Posts: 750
Joined: Thu Nov 08, 2012 12:40 pm
Location: Between Cabela's and Crestwood
Has liked: 0
Been liked: 0

Re: HiperTouch on Board at Stamler Machine

Post by adayton » Wed Mar 18, 2015 8:13 pm

I now have the Hiperfire EDT... The Hiperfire 24 ... and the Hiperfire 24E in stock ...
I will definitely do what I mentioned earlier in my post so you have a chance to try one out ...
What I would ask is that you stop by with your rifle and I will install the FCG and allow you a week to try it out ... then let me know whether you would like to keep it or not ... if not, I would have you once again stop by and I will deinstall it ... If you decide to keep it, Just pay me for it ...
We will see how that works and make changes as they are needed ...
Please PM me with your requests ...
It looks like I can get these things in stock within just a few days as they are located in Minnesota ... Just to give you an example, I ordered over the weekend and they appeared in my mailbox today ...
Thanx,
Allan

Return to “Stamler Machine Co”

×